Page 1 of 1
Solenoid Control Valve
Posted: January 18th, 2010, 7:36 pm
by Sunny
I apologize for some incorrect information.
The KOP valves come from festo.com
But there are more valves available at clippard.com and norgren.com
When I look at these valves, I have no idea what I'm looking at so...yeah.
Re: Solenoid Control Valve
Posted: January 18th, 2010, 7:42 pm
by Tanner
Heh. All this pneumatics stuff is scary, I know nothing anymore. Ahhh!
The first one looks pretty good, though why are they in different sizes? Would we need to buy one for each direction (in and out) or does one do both?
-Tanner
Re: Solenoid Control Valve
Posted: January 18th, 2010, 7:50 pm
by Sunny
I have NO idea.
Re: Solenoid Control Valve
Posted: January 18th, 2010, 8:02 pm
by Tanner
Why remove the information? Don't need to remove it, just say you know it could be what we want, but you're not sure. Someone could know what it is (i.e. Dad/Dallas).
-Tanner
Re: Solenoid Control Valve
Posted: January 18th, 2010, 8:09 pm
by Sunny
http://www.festo.com/cms/en-us_us/7979.htmThe valve above was the one that I thought would be good, but I'm not sure how L/min translate to PSI
Re: Solenoid Control Valve
Posted: January 18th, 2010, 8:17 pm
by Tanner
Sunny wrote:http://www.festo.com/cms/en-us_us/7979.htm
The valve above was the one that I thought would be good, but I'm not sure how L/min translate to PSI
You don't. It's liters per minute. Each cylinder can hold x liters of air. Ergo, you can figure out how much time is needed to fill a full cylinder, ergo how fast it will open.
-Tanner